Forum » Support and Bug Reports »

Error watching for changes in directory

Advertisement

daftbusker
Guest

Error watching for changes in directory

Hi,

First, I'd like to thank you for the software, it's great. I'm using 3.7.4

I'm trying to use the 'Keep remote directory up to date' and it's chokes on one sub-directory. The error is

Error watching for changes in directory 'M:\home\daft\project\project-files\admin\user-scripts\'

M: is a samba share on a Linux server, winscp is on windows 2000.

I went in and recursively chmoded and chowned the whole directory in case it was a permission problem but to no avail. I also did a lsattr but I didn't see anything. There are sub directories in the user-scripts directory, but I have done other transfers with a larger number subdirectories (5 I think)

What was particularly strange was that if I go into the admin folder (in the above example) and then run the command, I don't get an error... My work around is to open several instances of winSCP but it's kind of clumsy.

Thanks for any help.

Reply with quote

Advertisement

martin◆
Site Admin
martin avatar
Joined:
Posts:
41,454
Location:
Prague, Czechia

Re: Error watching for changes in directory

I have improved error reporting for this case. Please download updated version and try again with it. Then post the full error message (do not forget to press "More" button or copy full error message using Ctrl+C). Thanks.

Reply with quote

daftbusker
Joined:
Posts:
3

Thanks for the help.

It now says the problem is with a directory inside the directory reported in the previous error.

(If you compare the new error message to the one in my last post, you'll see the directory names are slightly different because I'd typed (not c&p'ed) the old error, but I was pretty close.)

The new error:
---------------------------
Error
---------------------------
Error watching for changes in directory 'M:\home\daft\project\project-dev\root\user_scripts\root_tables'.
---------------------------
OK
---------------------------
I double-checked the permissions, etc., but I still don't see anything funny.

Reply with quote

martin◆
Site Admin
martin avatar
Joined:
Posts:
41,454
Location:
Prague, Czechia

Are you sure you have used the version linked from my post? You should have "more" button on the message to show additional info. Like:
---------------------------
Error
---------------------------
Error watching for changes in directory 'D:\XXX'.
---------------------------
System Error. Code: 2.
Cannot find the path specified.
---------------------------
OK
---------------------------
I'm leaving for one week now, so please do not expect another reply soon.

Reply with quote

daftbusker
Joined:
Posts:
3

Whoops

OK that makes sense, the error is:
System Error. Code: 56.
The network BIOS command limit has been reached
This article:
<invalid hyperlink removed by admin>

Mentions using the latest Service Pack for w2000 but I have 4 installed... I'm gonna check the Samba settings.

Reply with quote

Advertisement

daftbusker
Joined:
Posts:
3

Nothing yet

No, nothing yet. I spent a few hours looking around and couldn't turn up anything. I don't have the time to poke around too much right now, but if I figure out a solution I'll post it here. Opening a few winscp's at once won't kill me.

Thanks again for the software and your help,

- Daft

Reply with quote

FodderMK
Joined:
Posts:
5

I get the error as well:
System Error. Code: 56.
The network BIOS command limit has been reached
The directory it has problems with isn't always necessarily the same. I do seem to notice a correlation between this error and the number of files/directories though. If I tell WinSCP to monitor a relatively empty directory then everything works fine. If I tell it to monitor a directory with many files and subdirectories then I get this error.

I'm using WinSCP 3.7.5 (Build 294) on a fully-patched WinXP system. The settings I have checked in the "Keep remote directory up to date" window are "Update subdirectories", "Existing files only" and "No confirmations". If I uncheck "Update subdirectories" then WinSCP also works correctly, reinforcing the "trouble with lots of directories" theory.

If you'd like me to run any more tests just let me know. I don't have any control over the remote box, however, so the testing I can do there is limited.

Reply with quote

martin◆
Site Admin
martin avatar

It seems that there is some system limit on number of directories being watched. If this is true, I can hardly do anything about that. BTW, is the directory you are watching on network drive?

What is approximate number of subdirectories in the directory?

Reply with quote

Advertisement

FodderMK
Joined:
Posts:
5

Yes, actually, it was on a network drive. So for testing I mirrored everything relevant on the network to my local machine and tried it again. The error did not occur. So it seems like the solution (for me) is to work on my local machine.

To answer your other question, there are 406 folders, 1540 files. Another project I work on contains 802 folders, 4925 files. For that project I get the following error when attempting to use the "Keep remote directory up to date" feature:
Cannot watch for changes in more then 500 directories and subdirectories
But at least that error code makes sense to me and I'll be able to work around it. Thanks for your help!

Reply with quote

Jens P.
Guest

Same Problem

Hi,

I am on Windows 2000 and files are stored at a Novell network directory!
The webserver is a Linux machine
Error watching for changes in directory 'R:\Data\_CurrentProject\abwesenheit_test':

System Error. Code: 1.
Unzulässige Funktion
I think Unzulässige Funktion in English is illegal or forbidden?!

What can be the reasons?
Greetz

Reply with quote

martin◆
Site Admin
martin avatar

Re: Same Problem

@Jens: Your Novell network probably does not support the "change notification" functionality.

Reply with quote

Advertisement

tjfulopp
Guest

cannot auto update on Novell

Ahoj Martin,

The "Keep remote directory up to date" does not work if the source is on Novell server. This has been a serious problem for me since there are several people who need access to the source files. In this forum, I see other WinSCP users need it as well.

Do you have plans to introduce this functionality in the coming release of WinSCP? I understand Novell may work differently than Windows but I can imagine there are ways to achieve it.

Thanks for the amazing software -

Tom

Reply with quote

martin◆
Site Admin
martin avatar

Re: cannot auto update on Novell

@tjfulopp: If the Novell drive does not support the notification, I cannot do anything about it. Perhaps it is configurable?

Reply with quote

Vacilando
Joined:
Posts:
8
Location:
Slovakia

Re: cannot auto update on Novell

martin wrote:

Perhaps it is configurable?
I can formulate a question for a Novell discussion forum or their support people. What should I ask them about -- what signal / process / flag is it, technically speaking, that WinSCP needs to know in order to register a change in a directory?

Reply with quote

Pada
Joined:
Posts:
5
Location:
Stellenbosch, South Africa

System Error. Code: 1. Incorrect function when using SAMBA

Hi,

I'm getting exactly the same error as @Jens P.:
System Error. Code: 1.
Incorrect function
I know it's the same error, because I've worked in Germany for a few months and I've been to Prague :)
Anyways, I have tried WinSCP 3.8.2, 4.1.8 & 4.2.3 beta and they all give the same error. I'm trying to "Keep remote directory up to date", where my local directory is a SAMBA share on Ubuntu. I'm actually running Windows XP as the guest OS & Ubuntu as the host OS using VirtualBox.

Using Debug 2 level, it is showing: 
. 2009-10-22 22:43:22.830 Session upkeep
. 2009-10-22 22:43:22.830 Looking for network events
. 2009-10-22 22:43:22.830 Timeout waiting for network events
. 2009-10-22 22:43:23.311 Session upkeep
. 2009-10-22 22:43:23.311 Looking for network events
. 2009-10-22 22:43:23.311 Timeout waiting for network events
. 2009-10-22 22:43:23.812 Session upkeep
. 2009-10-22 22:43:23.812 Looking for network events
. 2009-10-22 22:43:23.812 Timeout waiting for network events
. 2009-10-22 22:43:24.453 Session upkeep
. 2009-10-22 22:43:24.453 Looking for network events
. 2009-10-22 22:43:24.453 Timeout waiting for network events
. 2009-10-22 22:43:24.813 Session upkeep
. 2009-10-22 22:43:24.813 Looking for network events
. 2009-10-22 22:43:24.813 Timeout waiting for network events
I guess its impossible to fix WinSCP since it's an underlaying error of Windows / SAMBA shares?

Regards
Chris Kistner

Reply with quote

Advertisement

Pada
Joined:
Posts:
5
Location:
Stellenbosch, South Africa

Yes, I did receive the email. I was just too busy with my project at the time.

I've ran the debugging version, replicated the error and uploaded the log file to:
<invalid hyperlink removed by admin>

Reply with quote

Pada
Joined:
Posts:
5
Location:
Stellenbosch, South Africa

OK, I've ran the winscp424pada build. With that build it managed to get further than the other stable/development builds. It even showed "Watching for changes in 92 directories...", which it weren't able to do previously. HOWEVER, it's immediately crashing right after it showed that in the status listbox.

The trace log file has been uploaded here: <invalid hyperlink removed by admin>

Reply with quote

martin◆
Site Admin
martin avatar

Sorry for delay. In the log I can see that WinSCP was running yet minutes after that. So do you say that the WinSCP window disapeared from your desktop?

Reply with quote

Advertisement

Pada
Joined:
Posts:
5
Location:
Stellenbosch, South Africa

No problem.

I find that strange that the Window was open a few minutes after that. It might be that I've left the error message open to try and copy the Windows crash report.

I've now rerun the same debugging application again and this time I quickly closed the error window.
New trace log (zipped) is attached.

If you want me to run certain debugging/tracing applications I would be more than glad to do that. I'm not a reverse engineer, but I'm a quite capable Java/C# programmer.

Thanks for all your time & effort that you've put into this problem.

Regards
Chris
  • WinSCP0BE8trace.zip (44.84 KB, Private file)

Reply with quote

Pada

OK, thanks for the reply.

I think I'll resort to 2 WinSCP instances. One for watching the changes on my computer, which then copies the files to the local WinXP machine, and then another WinSCP instance for watching & updating the remote server.

Reply with quote

leoslg
Guest

Error watching for changes in directory

Error watching for changes in directory
*my/path/*

----------------------------------------
System Error. Code: 1.
Incorrect Function.
----------------------------------------
I reached this error, and I have no idea what this function means.

Reply with quote

Advertisement

martin◆
Site Admin
martin avatar

Re: Error watching for changes in directory

@leoslg: Is there anything special about the "my/path"? Is it a plain local drive? Or a network drive? Or something else?

Reply with quote

Advertisement

You can post new topics in this forum

Documentation

Support

Associations

Follow Us