Invalid access to memory - TTerminalItem::Cancel

Advertisement

nixgod@...
Guest

Invalid access to memory - TTerminalItem::Cancel

doubt this one is traceable, but i'll submit anyway, this just happened after a file failed to upload and i tried to clear the queue by pressing the red X on the queue

WinSCP 5.7.4

Error message:
Invalid access to memory.

Stack trace:
(00670B33) TTerminalItem::Cancel
(0005A60A) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
41,454
Location:
Prague, Czechia

Re: Invalid access to memory - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

mackmatt10@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0007C61F) ntdll.dll
(00069E6A) ntdll.dll.KiUserExceptionDispatcher

Reply with quote

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

stevefoobar
Joined:
Posts:
4
Location:
Chicago, Illinois USA

Invalid access to memory - TTerminalItem::Cancel

I had started a queue transfer (background) session with "transfer files individually" set and "New and updated files only" selected and a max of 7 simultaneous uploads set in preferences. It correctly started the transfer session by first determining that many of the 161 files were older than the FTP site files and didn't need to be transferred before it found the 7 files that did need to be transferred and initiated the simultaneous transfer for those.

I then scrolled through the queue window and saw the files that did not need to be transferred were still listed but were "grayed out" and said "Completed".

I then selected one of them and clicked on the "X Remove selected queue item". This is what caused the error message.

This is repeatedly reproducible.

I hope this helps. This looks like a great piece of software but I've only used it for about an hour so far.

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

error.jpg

Reply with quote

Advertisement

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

glee@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

I placed four files into the queue to transfer while a large batch of files was transferring. I then tried to "Execute Now" each of the four files, to bump them ahead of the large batch. When I did this, the UI requested my login password to the remote SFTP server. I did not have that easily available, so I cancelled each of the four files from the queue as the password was requested for each. After the cancels had been processed, the four items were left in the queue list (shadowed). I then tried to right click and "cancel" each of the shadowed entries from the queue, just to clear the display while other batch processes still active in the queue were running. It was at that point that the error occurred.


WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to address you have used to register on this forum.

Reply with quote

Advertisement

martin
Site Admin
martin avatar
Joined:
Posts:
41,454
Location:
Prague, Czechia

Re: Debug Version

stevefoobar wrote:

I'm sorry but I don't believe I ever received a link for a debug version of your software. I checked my spam folder and it wasn't there either.
I've resent it, removing the "foo bar" from the email address, you have specified in your profile. I hope it gets to you now.

EDIT: The email returned, so it did not work. If I send it to the exact address from your profile, it does not return.

Reply with quote

dassolucas@...
Guest

Invalid access to memory - TTerminalItem::Cancel

I just added a folder for copy from my FTP to my PC (is a folder with 12 folders -for each month- with images from Wordpress).

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

contact@...
Guest

Invalid access to memory - TTerminalItem::Cancel

Was working on a remote host (over an _unreliable_ long distance wifi link) when the host dropped out and this error appeared when I tried to empty the queue.

WinSCP 5.7.5

Error message:
Invalid access to memory.

Stack trace:
(00670E87) TTerminalItem::Cancel
(0007C61F) ntdll.dll
(00069E6A) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

peter.sasi@...
Guest

Invalid access to memory - TTerminalItem::Cancel

Windows 10 after its first major upgrade

Downloading on 9 threads from a server very far (600ms+RTT! latency) but with relatively high bandwidth (total 20Mbits/sec)

WinSCP 5.7.6

Error message:
Invalid access to memory.

Stack trace:
(00671937) TTerminalItem::Cancel
(0008A9AF) ntdll.dll
(00077F5A) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

bringtherain64@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Invalid access to memory.

Stack trace:
(00671937) TTerminalItem::Cancel
(0005A5DA) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

tuglersamuel@...
Guest

Accès mémoire invalide - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Accès mémoire invalide.

Trace de la pile :
(00671937) TTerminalItem::Cancel
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: Accès mémoire invalide - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

Advertisement

pozas1992@...
Guest

Acceso a memoria no válido - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

When pressing the Delete button on a completed upload in the queue, the following error appears
WinSCP 5.8.2

Error message:
Acceso a memoria no válido

Traza de la pila:
(006A909F) TTerminalItem::Cancel
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: Acceso a memoria no válido - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

dan@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

Created new file on remote server, edited and attempted to "save" (upload). No success.

WinSCP 5.7.7

Error message:
Invalid access to memory.

Stack trace:
(00672487) TTerminalItem::Cancel
(0008A61F) ntdll.dll
(00077E7A) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

stephen.herbert@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.6

Error message:
Invalid access to memory.

Stack trace:
(00671937) TTerminalItem::Cancel
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

songchaofly@...
Guest

无效的内存访问。 - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.7.7

Error message:
无效的内存访问。

Stack trace:
(00672487) TTerminalItem::Cancel
(00062496) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: 无效的内存访问。 - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

veronique.breault@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.2

Error message:
Invalid access to memory.

Stack trace:
(006C375F) TTerminalItem::Cancel
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Ray@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.1

Error message:
Invalid access to memory.

Stack trace:
(006C2AA7) TTerminalItem::Cancel
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

Advertisement

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

hentaism85@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.3

Error message:
Invalid access to memory.

Stack trace:
(006C572F) TTerminalItem::Cancel
(000624F6) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

denis.dr2co@...
Guest

Ошибка доступа к памяти - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>



WinSCP 5.9.3

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(006C572F) TTerminalItem::Cancel
(00045A86) ntdll.dll
(0000F13E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.
  • Screenshot.jpg (223.35 KB, Private file)

Reply with quote

eg7822@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.5

Error message:
Invalid access to memory.

Stack trace:
(006C5F3F) TTerminalItem::Cancel
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

hmh2629@...
Guest

메모리 접근이 잘못 되었습니다 - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.9.5

Error message:
메모리 접근이 잘못 되었습니다.

스택 추적:
(006C5F3F) TTerminalItem::Cancel
(00081D3F) ntdll.dll
(0006F8EA) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: 메모리 접근이 잘못 되었습니다 - TTerminalItem::Cancel

Thanks for your report.
I will take a look at this issue.

Reply with quote

Matija.Lokar@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>

Editing existing file.

<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.11.1

Error message:
Invalid access to memory.

Stack trace:
(006DF8D7) TTerminalItem::Cancel
(000851DF) ntdll.dll
(00073161) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

adjarick@...
Guest

Ошибка доступа к памяти - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.1

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(006EC60B) TTerminalItem::Cancel
(0005A466) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

cocuckooooooc@...
Guest

Ошибка доступа к памяти - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13.1

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(006EC60B) TTerminalItem::Cancel
(0003E08E) ntdll.dll
(0003DEF6) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: Ошибка доступа к памяти - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

surendra@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.13

Error message:
Invalid access to memory.

Stack trace:
(006EC48F) TTerminalItem::Cancel
(00088DBF) ntdll.dll
(0006FCB1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

sowmya.citytech@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.1

Error message:
Invalid access to memory.

Stack trace:
(0074AFA3) TTerminalItem::Cancel
(00083FFF) ntdll.dll
(00071931) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

joe@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
TCPsendBuf was overloaded on a Virtualizo/Plesk VM and so ssh session failed to establish- now transfer is stuck in queue as completed but not able to be removed (removal attempt causes memory access error).
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.2

Error message:
Invalid access to memory.

Stack trace:
(0074BCA7) TTerminalItem::Cancel
(0008402F) ntdll.dll
(00071931) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

jose.martinez-gonzalez@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.2

Error message:
Invalid access to memory.

Stack trace:
(0074BCA7) TTerminalItem::Cancel
(0007E16F) ntdll.dll
(0006BD81) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

balwinder.singh@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.3

Error message:
Invalid access to memory.

Stack trace:
(0074C19B) TTerminalItem::Cancel
(00087C8F) ntdll.dll
(00073131) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

acidburn@...
Guest

Invalid access to memory - TTerminalItem::Cancel

trying to transfer files to an og xbox. always fails after the first top folder finishes. transfer is the queue stays open, no further transfer is done. canceling the transfer leads to the rror message.

<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15.3

Error message:
Invalid access to memory.

Stack trace:
(0074C19B) TTerminalItem::Cancel
(00087C8F) ntdll.dll
(00073131) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

Advertisement

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

manojvb@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.16.2

Error message:
Invalid access to memory.

Stack trace:
(00CBB827) TTerminalItem::Cancel
(00087D6F) ntdll.dll
(00073211) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

rexxagon@...
Guest

Invalid access to memory - TTerminalItem::Cancel

I sent lots of files (hundreds of thousands, 40+GB). Cancelled midway through. Queue wasn't clearing (was frozen). Tried cancelling again, nothing happened, tried All -> Cancel All. Nothing. Decided to wait. Error popped up.

WinSCP 5.15.9

Error message:
Invalid access to memory.

Stack trace:
(0074CB7B) TTerminalItem::Cancel
(00087D6F) ntdll.dll
(00073211) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

brian.nguyen209@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.15

Error message:
Invalid access to memory.

Stack trace:
(0074AF7B) TTerminalItem::Cancel
(00087D6F) ntdll.dll
(00073211) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

boub.popsyteam@...
Guest

Accès mémoire invalide - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.2

Error message:
Accès mémoire invalide.

Trace de la pile :
(00CBB7FF) TTerminalItem::Cancel
(00087D7F) ntdll.dll
(00073221) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

boub.popsyteam@...
Guest

Accès mémoire invalide - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.2

Error message:
Accès mémoire invalide.

Trace de la pile :
(00CBB7FF) TTerminalItem::Cancel
(00087D7F) ntdll.dll
(00073221) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

afootytop@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.7

Error message:
Invalid access to memory.

Stack trace:
(00CBE017) TTerminalItem::Cancel
(00087E3F) ntdll.dll
(000732D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

qwe@...
Guest

Ошибка доступа к памяти - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.6

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(00CBD86B) TTerminalItem::Cancel
(00087E3F) ntdll.dll
(000732D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

dovid@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.7

Error message:
Invalid access to memory.

Stack trace:
(00CBE017) TTerminalItem::Cancel
(0006246E) ntdll.dll
(0000F12E) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

lmandies@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.2

Error message:
Invalid access to memory.

Stack trace:
(00CBB7FF) TTerminalItem::Cancel
(0008A63F) ntdll.dll
(00077E9A) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

kaions@...
Guest

メモリのアクセス違反 - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.9

Error message:
メモリのアクセス違反

スタック トレース:
(00CBF933) TTerminalItem::Cancel
(000861AF) ntdll.dll
(00072B31) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

alana@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.9

Error message:
Invalid access to memory.

Stack trace:
(00CBF933) TTerminalItem::Cancel
(00088F2F) ntdll.dll
(000743C1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

webmaster@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.10

Error message:
Invalid access to memory.

Stack trace:
(00CBFAAB) TTerminalItem::Cancel
(000A36CF) ntdll.dll
(00090571) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

tristanory@...
Guest

Accès mémoire invalide - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.10

Error message:
Accès mémoire invalide.

Trace de la pile :
(00CBFAAB) TTerminalItem::Cancel
(0008627F) ntdll.dll
(00072C01) ntdll.dll.KiUserExceptionDispatcher
Before I had too many connections to an ftp server. I'm not sure it is the reason it appends.

The problem happens rarely. I cannot reproduce it.

Reply with quote

shidalishengqing@...
Guest

无效的内存访问。 - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.17.7

Error message:
无效的内存访问。

Stack trace:
(00CBE017) TTerminalItem::Cancel
(0008627F) ntdll.dll
(00072C01) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

kaczan@...
Guest

Acesso inválido à memória - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.19.1

Error message:
Acesso inválido à memória

Rastreamento de pilha:
(00CEC19F) TTerminalItem::Cancel
(0008788F) ntdll.dll
(00073EC1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

soren@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.19.2

Error message:
Invalid access to memory.

Stack trace:
(00CEC767) TTerminalItem::Cancel
(0009759F) ntdll.dll
(00075CA1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

hmmartinez@...
Guest

Acceso a memoria no válido - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.19.1

Error message:
Acceso a memoria no válido

Traza de la pila:
(00CEC19F) TTerminalItem::Cancel
(000878AF) ntdll.dll
(00073EE1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

usagib@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.1

Error message:
Invalid access to memory.

Stack trace:
(00CF6F5F) TTerminalItem::Cancel
(0008786F) ntdll.dll
(00073EE1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

testuser@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.1

Error message:
Invalid access to memory.

Stack trace:
(00CF6F5F) TTerminalItem::Cancel
(00097FCF) ntdll.dll
(000761E1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

jishita@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.2

Error message:
Invalid access to memory.

Stack trace:
(00CF91E3) TTerminalItem::Cancel
(000980DF) ntdll.dll
(000762A1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

rickdees78@...
Guest

Invalid access to memory - TTerminalItem::Cancel

Error Occurs when trying to cancel a download that that has 'completed' but not disappeared.

The cause of this is done by another error. When attempting to download from an ftp with to many downloads. Say I have 3 downloads set but the server only allows 2 connections from Host. The third pops up an error. If you okay this message, hit settings between the error messages and change the background to 2. The third becomes a greyed out 'Completed' that will not disappear. This prevents any other queued items from starting (the first error), this is the result of the second error when trying to cancel the completed item to restart queues.

WinSCP 5.21.6


Stack trace:
(00D0315F) TTerminalItem::Cancel
(00087B7F) ntdll.dll
(00074001) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

@rickdees78: Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

damien@...
Guest

Accès mémoire invalide - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21.7

Error message:
Accès mémoire invalide.

Trace de la pile :
(00D0318B) TTerminalItem::Cancel
(00087B7F) ntdll.dll
(00074001) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

joeyflint@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 5.21

Error message:
Invalid access to memory.

Stack trace:
(00CF6E6B) TTerminalItem::Cancel
(000974CF) ntdll.dll
(00077751) ntdll.dll.KiUserExceptionDispatcher

I know how to reproduce the problem or the problem happens frequently enough. I wish to be contacted by the WinSCP team to help resolving the problem.

Reply with quote

martin
Site Admin
martin avatar

Re: Invalid access to memory - TTerminalItem::Cancel

@joeyflint: Thanks for your report.
I have sent you an email with a debug version of WinSCP to the address you have used to register on this forum.

Reply with quote

ior@...
Guest

Ошибка доступа к памяти - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>
ftp with esp8266(ftp):
1. edit text file
2. save - not work
3. manual clear tasks
4. memory error
WinSCP 6.1

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(00D1E523) TTerminalItem::Cancel
(00087A7F) ntdll.dll
(000740D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

qwreogovl@...
Guest

Ошибка доступа к памяти - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 6.1.2

Error message:
Ошибка доступа к памяти.

Трассировка стека:
(00D1D6E7) TTerminalItem::Cancel
(00097FAF) ntdll.dll
(00076221) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

steven.bauer@...
Guest

Invalid access to memory - TTerminalItem::Cancel

This happened when I tried to cancel an item that was in the background transfer queue.

WinSCP 6.1.2

Error message:
Invalid access to memory.

Stack trace:
(00D1D6E7) TTerminalItem::Cancel
(00087A7F) ntdll.dll
(000740D1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

shamsyuhada.rais@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 6.3

Error message:
Invalid access to memory.

Stack trace:
(00B794A3) TTerminalItem::Cancel
(00087B7F) ntdll.dll
(00074001) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

vkrnt18@...
Guest

Invalid access to memory - TTerminalItem::Cancel

<Try to describe precise steps that lead to the problem (where do you click, what keys do you press, what do you see, etc.)>
<If relevant, consider attaching a session log file or a screenshot)>

WinSCP 6.3.4

Error message:
Invalid access to memory.

Stack trace:
(00B7A1A7) TTerminalItem::Cancel
(00098CCF) ntdll.dll
(000781E1) ntdll.dll.KiUserExceptionDispatcher

The problem happens rarely. I cannot reproduce it.

Reply with quote

Advertisement

You can post new topics in this forum